H35-580_V2.0 Sample Questions Answers

According to the Huawei 5G Base Station Product Description, the following boards support CPU usage query:

• UPEU (Universal Power and Environment Interface Unit): It provides power supply and environment monitoring functions for other boards in a subrack. It supports CPU usage query through commands or web pages.
• UMPT (Universal Main Processing and Transmission Unit): It provides main processing and transmission functions for a subrack. It supports CPU usage query through commands or web pages.
• UBBP (Universal Baseband Processing Unit): It provides baseband processing functions for a subrack. It supports CPU usage query through commands or web pages.

The FAN (Fan Unit) does not support CPU usage query because it does not have a CPU.

According to the 5G Site Survey Guide (V1.0) (PDF)-EN, the engineering file is not a material that needs to be prepared before site survey. The engineering file is a document that records the site survey results and the design plan for the site. The engineering file is generated after the site survey is completed and approved by the customer. The materials that need to be prepared before site survey are:

• Local map: A map of the area where the site is located, showing the roads, buildings, landmarks, and other features. The local map helps the site survey team to plan the route, identify the site location, and evaluate the surrounding environment.
• Site survey table: A table that lists the items and parameters that need to be checked and measured during the site survey, such as antenna installation space, equipment room space and load bearing capacity, power supply, grounding, lightning protection, cable routing, etc. The site survey table helps the site survey team to conduct a comprehensive and systematic inspection of the site conditions and record the data.
• 5G antenna height table: A table that shows the recommended antenna height for different scenarios and frequency bands based on empirical data and theoretical calculations. The 5G antenna height table helps the site survey team to determine the optimal antenna installation height for achieving the best coverage and performance.

Therefore, the correct answer is D.

According to the HCIA-5G V2.0 Exam Outline, the statements in options A, B, and C are correct descriptions of throughput-related indicators, which correspond to options A, B, and C. The statement in option D is incorrect because adding the last small packet of each data transmission burst and its transmission duration will reduce the accuracy of throughput measurement.

According to the Blind handover or blind redirection method and system, A3 is the event that is used by the gNodeB to trigger a blind redirection procedure. A3 is defined as “neighbour becomes offset better than serving” in 3GPP TS 38.331. When the gNodeB detects that the UE’s signal quality on a neighbouring cell is better than that on the serving cell by a certain offset, it can initiate a blind redirection procedure to switch the UE to the neighbouring cell without requiring measurement reports from the UE.

According to the Huawei Releases 5G Series Products, Huawei’s AAU5313 and AAU5613 are both RF modules that support 64T64R. The AAU5313 is an ultra-wideband Massive MIMO product that supports both 64T64R and 400 MHz bandwidth on the C-band. The AAU5613 is a BladeAAU Pro product that supports 64T A+P integration on sub-3 GHz bands. The AAU5612 is a BladeAAU product that supports only 32T A+P integration on sub-3 GHz bands. The RRU3939 is not an AAU product but an RRU (Remote Radio Unit) product that supports only 8T8R on sub-3 GHz bands.

 According to the Huawei Career Certification Learning, 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h, which is much higher than the 4G limit of 350 km/h.

According to the China’s Approach to Military 5G Networks and Related Military Applications, CU-DU Split of a base station means that the base station’s control plane functions (CU) and user plane functions (DU) are separated, which can improve network flexibility and scalability.

According to the HCIA-5G V2.0 Exam Outline, no response from the UE, insufficient radio resources, and unauthorized UE are cause values of QoS flow setup failures, which correspond to options A, B, and D. Insufficient transmission resources is not a cause value of QoS flow setup failures, but a cause value of handover execution failures, which corresponds to option C.

According to the HCIA-5G V2.0 Exam Outline, base station receive diversity gain is a factor that affects uplink coverage, not downlink coverage. Downlink coverage is affected by factors such as downlink path loss, downlink transmit power, and antenna gain, which correspond to options B, C, and D.

According to the Career Certification - Huawei Enterprise, single site verification is used to test and verify the equipment functions and coverage capability after gNodeB hardware is installed and commissioned, which corresponds to option C.

According to the 5G NR Physical Layer Specifications, Paging, SIB, and MIB are common messages that need to be scheduled. Paging is a message that is used to notify a UE of incoming data or system information when it is in idle mode or connected mode inactive state. SIB stands for System Information Block, which is a message that contains various system parameters and configuration information for UEs. MIB stands for Master Information Block, which is a message that contains essential system information such as system frame number and subcarrier spacing. These common messages need to be scheduled because they are transmitted periodically and have fixed time-frequency resources.

According to the HCIA-5G V2.0 Exam Outline, encryption, decryption, and integrity protection are functions of the PDCP layer, not the RRC layer. The RRC layer is responsible for radio resource management, access control, handover and mobility, among other functions.

According to the NR-ARFCN (NR absolute radio frequency channel number), the NR-ARFCN value consists of two components: the band indicator and the channel number. The band indicator represents the frequency band on which the carrier frequency lies, while the channel number represents the specific carrier frequency within that band. The NR-ARFCN value is calculated by the following formula:

NR-ARFCN = FREF-Offs + NREF-Offs + ΔFGlobal * (Fcarrier - FREF-Offs) / AFGIobal

where FREF-Offs is the reference frequency offset, NREF-Offs is the reference NR-ARFCN offset, ΔFGlobal is the global frequency raster, Fcarrier is the carrier frequency, and AFGIobal is the absolute frequency granularity.

Given that AFGIobal is 15 kHz, FREF-Offs is 3000 MHz, and NREF-Offs is 600000, we can plug in these values and Fcarrier = 3300 MHz into the formula and get:

NR-ARFCN = 3000 + 600000 + 5 * (3300 - 3000) / 0.015 NR-ARFCN = 633000

Therefore, the correct answer is A.

According to the HCIA-5G V2.0 Exam Outline, SDAP is a new protocol layer added to the 5G air interface protocol stack compared with 4G. SDAP stands for Service Data Adaptation Protocol, and it is used to map QoS flows to data radio bearers and perform header compression and decompression.

According to the LTE user plane protocol stack, the Layer 3 of the Uu interface consists of the RRC protocol and the IP data. The RRC protocol is responsible for radio resource management, access control, handover and mobility, and encryption and integrity protection. The IP data is the payload of the user plane that is transmitted over the PDCP layer.