CompTIA N10-009 Dumps

Direct Connect refers to a dedicated network connection between an on-premises network and a cloud service provider (such as AWS Direct Connect). This link bypasses the public internet, providing a more reliable and higher-bandwidth connection. It may not inherently include encryption because it relies on the security measures of the dedicated physical connection itself. In contrast, other options like VPN typically involve encryption as they traverse the public internet.

Understanding Subnetting:

Original Network: 192.168.1.0/24 has a subnet mask of 255.255.255.0, which allows for 256 IP addresses (including network and broadcast addresses).

Objective: Divide this network into two equal subnets.

Calculating Subnet Mask:

New Subnet Mask: To divide 192.168.1.0/24 into two equal halves, we need to borrow one bit from the host portion of the address, changing the subnet mask to 255.255.255.128 (/25).

Subnet Breakdown:

First Subnet: 192.168.1.0/25 (192.168.1.0 - 192.168.1.127)

Second Subnet: 192.168.1.128/25 (192.168.1.128 - 192.168.1.255)

Verification:

Each subnet now has 128 IP addresses (126 usable IP addresses, excluding the network and broadcast addresses).

Comparison with Other Options:

255.255.0.0 (/16): Provides a much larger network, not dividing the original /24 network.

255.255.254.0 (/23): Also creates a larger subnet, encompassing more than the original /24 network.

255.255.255.0 (/24): Maintains the original subnet size, not dividing it.

References:

CompTIA Network+ study materials on subnetting and IP addressing.

Importance of Proper Termination:

Cat 8 cabling requires precise termination practices to ensure signal integrity and reduce interference. One common requirement is to wrap the end connections in copper tape to maintain shielding and reduce electromagnetic interference (EMI).

Interference Troubleshooting:

Interference in high-frequency cables like Cat 8 can be caused by improper shielding or grounding. Checking the end connections for proper wrapping in copper tape is a crucial step.

Why Other Options are Less Likely:

Passthrough modular crimping plugs: Not specifically related to interference issues and are typically used for ease of cable assembly.

Connecting RX/TX wires to different pins: Would likely result in no connection or incorrect data transmission rather than interference.

Running a speed test on a device that can only achieve 100Mbps speeds: This would not diagnose interference and would not provide relevant information for Cat 8 cabling rated for higher speeds.

Corrective Actions:

Verify that all end connections are properly wrapped with copper tape before termination.

Ensure that the shielding is continuous and properly grounded throughout the installation.

Retest the cabling for interference after making corrections.

References:

CompTIA Network+ study materials and structured cabling installation guides.