Black Friday Sale - Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 65percent

Welcome To DumpsPedia

4A0-C04 Sample Questions Answers

Questions 4

Click on the exhibit.

An LDP-over-RSVP tunnel is established between PE-1 and PE-2. Which of the following is NOT required to protect the LDP-over-RSVP tunnel?

Options:

A.

PE-1 requires T-LDP sessions to both ABR-1 and ABR-2.

B.

PE-1 requires a full mesh of RSVP-TE LSPs to all routers in area 1.

C.

ABR-1 requires T-LDP sessions to all ABRs in area 0.

D.

PE-1 requires fast reroute enabled on all RSVP-TE LSPs.

Buy Now
Questions 5

An OSPF router receives an update in which the sequence number, age, and checksum are the same as the entry already in the topological database. What action is taken by the router?

Options:

A.

The link state information is not populated in the database but is forwarded to all neighbors

B.

The link state information already in the database is overwritten and the age is reset

C.

The link state information is not populated in the database and an acknowledgement is sent

D.

The link state information is regarded as old and nothing is done.

Buy Now
Questions 6

Identify two attributes of Distance Vector Protocols: (Choose two)

Options:

A.

Use split horizon by default.

B.

Send information about directly connected links to neighbors at periodic intervals.

C.

Use holddown timers when topologies change to allow for convergence.

D.

Maintain multiple databases: neighbor, topology and routing.

Buy Now
Questions 7

If an Nokia 7750 SR is an iLER operating in pipe mode, which of the following regarding the TC field (EXP bits) is TRUE?

Options:

A.

The TC field is set based on the value of the DSCP field inside the customer packet.

B.

The TC field is set to a specific value via explicit administrative configuration.

C.

The TC field is set to a system generated random number.

D.

The TC field is set by the eLER.

Buy Now
Questions 8

Which of the following about VPLS MAC learning is FALSE?

Options:

A.

The PE routers of the service are responsible for learning MAC addresses.

B.

Flooding ensures that all PEs in a fully-meshed VPLS will learn the source address of all traffic.

C.

MAC learning reduces flooding of frames with previously learned addresses.

D.

Multiple VPLSes on the same PE share the same MAC FDB.

Buy Now
Questions 9

Click the exhibit button.

The OSPF packets shown have been exchanged between two neighbors. What state is the OSPF adjacency in?

Options:

A.

The adjacency state is two way because both routers have received a database description packet.

B.

The adjacency is in the exchange state. The next step is to exchange link state request and link state update packets.

C.

The adjacency is in the ex start state. The routers have exchanged database description packets, but still have to negotiate the starting sequence number.

D.

The adjacency state is full. The routers are exchanging database description packets to notify each other that all link state advertisements have been received.

Buy Now
Questions 10

Which of the following comparisons between E-pipes and VPLSes is FALSE?

Options:

A.

They both function as a Layer 2 switch from the service provider's perspective.

B.

They both support SAP encapsulations of null, dot1Q and Q-in-Q.

C.

They both use SAPs as the demarcation point between the customer and the provider.

D.

MAC addresses are learned by VPLSes, but not by E-pipes.

Buy Now
Questions 11

Click on the exhibit.

An LSP path is established on router R1 toward router R6. If there is a problem on router R4, but the link between R2 and R4 remains up, which of the following will affect the failure detection time?

Options:

A.

The time router R2 takes to receive a PATH Error message from router R4.

B.

The time router R2 takes to find out a number of RSVP Hello messages have been missed.

C.

The time router R2 takes to send a PATH Tear message to the head-end router.

D.

The time router R2 takes to receive a PATH message from router R4 after a PATH refresh interval.

Buy Now
Questions 12

Click the exhibit button.

The following command sequence is executed on router R2:

  • A: R2# configure router ospf router-id 10.10.10.99
  • A: R2# configure router router-id 10.10.10.66

On router R1, what router ID appears for router R2 directly after these commands are executed?

Options:

A.

10.10.10.99

B.

10.10.10.66

C.

10.10.10.2

D.

10.10.10.1

Buy Now
Questions 13

A network consists of four PE routers. A customer requires a VPLS and has sites connected to each PE. The VPLS is fully meshed using IP/MPLS. How many SDPs must be configured on each PE?

Options:

A.

3

B.

4

C.

6

D.

8

Buy Now
Questions 14

Which of the following regarding BGP Path Identifier is FALSE?

Options:

A.

Path-ID is a four-octet identifier pre-pended to the NLRI field of a BGP update.

B.

Path-ID is an optional transitive attribute used to advertise multiple paths.

C.

Path-ID uniquely identifies each path advertised to a neighbor.

D.

A BGP speaker that re-advertises a route must generate its own Path-ID.

Buy Now
Questions 15

What are the default Hello and Dead timer intervals for OSPF on the Nokia 7750 SR?

Options:

A.

5 and 15 seconds

B.

10 and 30 seconds

C.

5 and 20 seconds

D.

10 and 40 seconds

Buy Now
Questions 16

Which of the following LSA types stay within an OSPF area, and are not flooded outside of the area? Choose two answers.

Options:

A.

Router LSA

B.

Network LSA

C Summary network LSA

C.

Summary router LSA

D.

Type 5 (AS external) LSAs

Buy Now
Questions 17

What must be configured on the Nokia 7750 SR for RIP to advertise locally attached links?

Options:

A.

A policy statement within the router identifying what is to be advertised

B.

Access-lists denoting what is to be advertised

C.

Default metrics for each link

D.

A group and neighbor statement for each peer

Buy Now
Questions 18

Which of the following best describes the type of packets used by OSPF routers to exchange updates on a point-to-point link?

Options:

A.

IP packets sent to an IP multicast address.

B.

TCP packets sent to an IP multicast address.

C.

IP packets sent to an IP unicast address.

D.

UDP packets sent to an IP multicast address.

Buy Now
Questions 19

Which of the following regarding MPLS label value assignment is FALSE?

Options:

A.

Label values may be dynamically assigned by LDP.

B.

Label values may be dynamically assigned by RSVP-TE.

C.

Label values may be reserved for special uses.

D.

Label values may be dynamically assigned by IGP.

Buy Now
Questions 20

Which of the following is a characteristic of a VPLS?

Options:

A.

All SAPs of a VPLS belong to the same broadcast domain.

B.

When a new site is added, all the existing sites need to be shutdown and re-provisioned.

C.

An additional T-LDP session is required between PEs for each additional VPLS that is provisioned.

D.

Multiple VPLSes on the same router share a single MAC FDB.

Buy Now
Questions 21

Which LSA type is not found in point-to-point only OSPF networks?

Options:

A.

Type 1 Router LSA

B.

Type 2 Network LS A

C.

Type 3 Summary LSA

D.

Type 5 External LSA

Buy Now
Questions 22

Which of the following regarding MPLS encapsulation for VPRN services is TRUE?

Options:

A.

The customer's Layer 3 header is removed at the iLER.

B.

The customer's Layer 2 header is removed at the iLER.

C.

The customer's Layer 3 header is removed at the eLER.

D.

The customer's Layer 2 header is removed at the eLER.

Buy Now
Questions 23

Which regular expression will match the AS Path of a route originating in remote AS 65100?

Options:

A.

".+ 65100"

B.

"65100.+"

C.

".* 65100.*"

D.

"65100"

Buy Now
Questions 24

Choose the Distance Vector Protocols from the list below:

Options:

A.

OSPF

B.

RIPv1

C.

RIPv2

D.

IS-IS

Buy Now
Questions 25

Which of the following defines an FEC in traditional IP?

Options:

A.

A group of packets that will be forwarded by the router in the same manner, over the same path.

B.

A group of packets that arrive at the router on the same interface,

C.

A group of packets that leave the router on the same interface.

D.

A group of packets that arrive at the router on the same interface, from the same source.

Buy Now
Questions 26

Click the exhibit button.

Two neighboring OSPF routers have exchanged the packets shown. What state is the adjacency in?

Options:

A.

Full; both routers are exchanging Helios to maintain the adjacency.

B.

The adjacency is down.

C.

The adjacency is in exstart state.

D.

The adjacency is in the exchange state.

Buy Now
Questions 27

If OSPF is used in a multi-area OSPF network, which of the following statements regarding route summarization is true?

Options:

A.

Manual route summarization can only be done on autonomous system border routers.

B.

Manual route summarization must be done on all the backbone routers to be effective. Manual route summarization is optional on the routers in non-backbone areas.

C.

Manual route summarization is done on the ABRs. By default, automatic summarization is done; however, it may not be optimal for all networks.

D.

Manual route summarization is done on the ABRs. By default, no route summarization is done and all routes are advertised to all areas.

Buy Now
Questions 28

Which MPLS label mode saves label mappings received from all peer LSRs?

Options:

A.

Conservative label retention

B.

Liberal label retention

C.

Downstream on demand

D.

Downstream unsolicited

Buy Now
Questions 29

Initially, all ports on an Nokia 7750 SR have 10Gbps bandwidth. RSVP configuration limits reservable bandwidth to 30 percent on all interfaces. An LSP is signaled reserving 1 Gbps bandwidth. How much unreserved bandwidth is left on the interface?

Options:

A.

10 Gbps

B.

7 Gbps

C.

3 Gbps

D.

2 Gbps

Buy Now
Questions 30

Which of the following is TRUE when the explicit null is implemented?

Options:

A.

The penultimate router will forward packets to the eLER, based on the IP header.

B.

The eLER will receive packets with a top label value of 0.

C.

The eLER will receive packets with a top label value of 3.

D.

The penultimate router will pop the top label from the packets.

Buy Now
Questions 31

On an Nokia 7750 SR, what is the recommended approach for making sure that MTUs between a VPLS and its spoke IES termination match?

Options:

A.

Set the service MTU of the VPLS to match the IES MTU.

B.

Set the ip-mtu of the IES to match the service MTU of the VPLS.

C.

Set the SDP MTU of the IES to match the SDP MTU of the VPLS.

D.

Set the MTU of the IES's network port to match the service MTU of the VPLS.

Buy Now
Questions 32

Click on the exhibit. After the Isp-ping command is executed, which of the following best describe the router's action?

Options:

A.

MPLS Echo Request packets are sent within the RSVP-TE tunnel that is signaled for "lsp-toR2".

B.

MPLS Echo Request packets are sent within the LDP tunnel that is signaled for Mlsp-toR2".

C.

MPLS Echo Request packets are IP-routed to the destination address of "lsp-toR2".

D.

MPLS Echo Request packets are sent to the destination address of "lsp-toR2" over TCP.

Buy Now
Questions 33

Click on the exhibit.

The path of a fast reroute protected LSP is R1-R2-R3. Which of the following about the protected LSP path is TRUE?

Options:

A.

All routers along the path, R1, R2, and R3 can be PLRs.

B.

If the R1-R2 link fails, router R4 becomes an MP.

C.

If the R2-R3 link fails, router R3 becomes a PLR.

D.

Router R1 is the LSP head-end and can be a PLR.

Buy Now
Questions 34

How many databases does a Link State routing protocol use?

Options:

A.

One

B.

Two

C.

Three

D.

Four

Buy Now
Questions 35

Click on the exhibit.

Two LSPs traverse the path R1-R2-R3. Both LSPs are configured with facility fast reroute and link protection. When router R1 is the PLR, which router becomes the Merge Point (MP) for this LSP?

Options:

A.

Router R1

B.

Router R2

C.

Router R3

D.

Router R4

E.

Router R5

Buy Now
Questions 36

Which of the following regarding the withdrawal of routes from one BGP speaker to another is

TRUE?

Options:

A.

An update message is used. Only a single prefix can be withdrawn at a time.

B.

An update message is used. Multiple prefixes can be withdrawn at a time.

C.

A withdraw message is used. Only a single prefix can be withdrawn at a time.

D.

A withdraw message is used. Multiple prefixes can be withdrawn at a time.

Buy Now
Questions 37

Which of the following devices assumes the active role during the establishment of an LDP session?

Options:

A.

The peer with the higher physical address.

B.

The peer with the higher transport address.

C.

The peer with the lower physical address.

D.

The peer with the lower transport address.

E.

The peer that generated the first Hello message.

Buy Now
Questions 38

What is the source IP address in an OSPF update?

Options:

A.

224.0.0.5

B.

224.0.0.6

C.

The unicast IP address of the interface the update is sent on

D.

The system address of the router.

Buy Now
Questions 39

Click the exhibit button.

Given the topology and the show commands, and assuming that router R2 advertises all of its loopbacks into OSPF, what is the correct router R1 configuration?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 40

Click the exhibit button.

Which of the following would correctly configure routers R2, R3, and R4?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 41

In an OSPF Hello packet what fields must match all neighbor routers on the segment? (Choose 3)

Options:

A.

Area ID

B.

Hello and Dead Intervals

C.

Stub flag

D.

DR and BDR addresses

E.

The list of neighbors

Buy Now
Questions 42

Which of the following OSPFv3 LSAs have an AS scope?

Options:

A.

Link Local LSA

B.

Router LSA

C.

Network LSA

D.

Inter-Area Router LSA

E.

Intra-Area Prefix LSA

F.

None of the above LSAs have an AS scope.

Buy Now
Questions 43

Which of the following prefix lists include prefixes 192.168.128.0/17 and 192.168.64.0/18?

Options:

A.

Prefix list 192.168.0.0/16 through 18.

B.

Prefix 192.168.0.0/17 longer.

C.

Prefix list 192.168.0.0/17 through 18.

D.

Prefix 192.160.0.0/13 longer.

Buy Now
Questions 44

Click the exhibit button.

Routers R1 ā€ž R2, and R3 are running a classful routing protocol between them. Assuming that router R1 advertises all directly connected networks, how will these networks be represented in router R3's routing table?

Options:

A.

Router R3's routing table can only contain one of the routes, which will result in route flapping.

B.

Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.

C.

The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.

D.

The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.

Buy Now
Questions 45

What causes an adjacency to change from "Init" to "Two Way"?

Options:

A.

When a Link State Update is received in response to a Link State Request

B.

When a router receives a Hello packet from a neighbor that contains its router id in the neighbor list

C.

When OSPF neighbors exchange Database Descriptor packets

D.

When a Link State Acknowledgement is received in response to a Link State Update

Buy Now
Questions 46

From what range are 16-bit private AS numbers selected?

Options:

A.

64496 ā€“ 64511

B.

1 ā€“ 56319

C.

64512-65534

D.

64513-65535

E.

There are no defined private AS numbers; there are only private IP addresses.

Buy Now
Questions 47

Which of the following regarding the location of an MPLS label is FALSE?

Options:

A.

The MPLS label value may be carried in an ATM header.

B.

The MPLS label value may be carried in a shim header.

C.

The MPLS label value may be carried in an OSPF header.

D.

The MPLS label value may be carried in a Frame Relay header.

Buy Now
Questions 48

Click on the exhibit.

What is the possible reason that the label for prefix 192.10.1.2/32 is not active?

Options:

A.

The router does not have a route to reach to the peer 10.10.10.2/32.

B.

The router does not have a route to reach to the prefix 192.10.1.2/32.

C.

The router does not have an export policy defined to export the prefix 192.10.1.2/32 into LDP.

D.

The router receives an invalid label for the prefix 192.10.1.2/32 from its peer.

Buy Now
Questions 49

What command could be used to verify proper configuration of a static route in an Nokia 7750 SR router?

Options:

A.

Show route-table

B.

Show router routing-table

C.

Show router route-table

D.

Show static

Buy Now
Questions 50

Which of the following about VPRNs is TRUE?

Options:

A.

Customers must use the same routing protocol as the service provider.

B.

Customers belonging to the same VPRN service must use the same subnet.

C.

Service providers only need to perform configurations on the PEs to add additional VPRNs.

D.

For each VPRN, only one customer can be connected at each PE.

Buy Now
Questions 51

Which of the following statements about the BGP Advertise External feature is FALSE?

Options:

A.

It modifies the BGP advertisement logic.

B.

It improves convergence times and allows for better load sharing.

C.

It allows a router to advertise multiple external paths for a single prefix.

D.

It supports both IPv4 and IPv6.

Buy Now
Questions 52

Which of the following statements regarding route reflectors is TRUE?

Options:

A.

Route reflectors propagate BGP learned routes to their clients.

B.

Route reflectors require "n" iBGP sessions, where "n" is the number of BGP routers in the AS.

C.

Route reflectors disable iBGP split horizon for all iBGP peers in the AS.

D.

Route reflectors do not work in conjunction with confederations.

Buy Now
Questions 53

Click the exhibit.

The CEs use BGP and export policies to advertise their local prefixes with the VPRN on their PEs. If the VPRN is functioning properly, which of the following commands will succeed when performed on router R1?

Options:

A.

"ping 192.168.20.1"

B.

"oam vprn-ping 100 source 192.168.10.1 destination 192.168.20.1"

C.

"oam vprn-ping 100 source 192.168.20.1 destination 192.168.10.1"

D.

"ping 10.10.10.6" (router R6's system IP)

Buy Now
Questions 54

An SDP using GRE encapsulation is configured for an E-pipe service. The network port used by the SDP has an MTU of 8000. What value does the SDP path MTU have by default on an Nokia 7750 SR?

Options:

A.

7958

B.

7978

C.

8022

D.

8042

Buy Now
Questions 55

Click the exhibit.

Router R1 is a route reflector with clients R2, R5 and R6. Prefixes advertised by router R5 have a local preference of 200. Router R3 advertises the prefix 192.168.1.0/27 to routers R5 and R6.

Assuming that none of the routers in AS 65540 is configured with "advertise-external", what is the expected output of "show router bgp routes" on router R5?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 56

Click on the exhibit.

An LSP traverses the path R1-R2-R3. With one-to-one fast reroute enabled, which router becomes a DMP for the detour tunnels?

Options:

A.

Router R1

B.

Router R2

C.

Router R3

D.

Router R4

E.

Router R5

Buy Now
Questions 57

Which of the following statements is TRUE?

Options:

A.

An OSPF adjacency can be established on an IES interface.

B.

IES allows provider MP-BGP sessions to be extended to customers.

C.

An IES service must use static routes in order to communicate with customer networks.

D.

An IES interface supports OSPF and IS-IS in passive mode only.

Buy Now
Questions 58

Click on the exhibit.

LSP 1's link between routers R3 and R6 has failed, and the RESV state at router R3 has timed out. Which of the following actions will router R3 initiate?

Options:

A.

Send a PathTear message towards router R6.

B.

Send a PathTear message towards router R1.

C.

Send a ResvTear message toward router R6.

D.

Send a ResvTear message toward router R1.

Buy Now
Questions 59

What class of attribute is Originator_ID?

Options:

A.

Well-known mandatory.

B.

Well-known discretionary.

C.

Optional transitive.

D.

Optional non-transitive.

Buy Now
Questions 60

What are the types of networks supported on an Nokia 7750 SR for OSPF? (Choose 2)

Options:

A.

Broadcast

B.

Non-Broadcast Multi-Access

C.

Point-to-Point

D.

Point-to-Multipoint

Buy Now
Questions 61

Click the exhibit.

Routers RR1 and RR2 are route reflectors with the same Cluster-ID. How does router RA treat the updates for prefix 192.168.1.0/27 received from routers RR1 and RR2?

Options:

A.

Router RA prefers the update received from router RR1.

B.

Router RA prefers the update received from router RR2.

C.

Router RA flags both updates as invalid.

D.

Router RA accepts both updates and flags them as used.

Buy Now
Questions 62

An LSP is configured with one-to-one FRR and node protection on a Nokia 7750 SR. Which of the following is FALSE?

Options:

A.

Each PLR signals a protection tunnel that avoids the downstream node.

B.

A single protection tunnel can protect all LSPs that go through the same hop.

C.

A link protection tunnel is signaled if a node protection tunnel cannot be established.

D.

Protection tunnels used in this LSP are also detour tunnels.

Buy Now
Questions 63

What address is used when RIPv2 uses multicast to send its updates?

Options:

A.

224.0.0.5

B.

224.0.0.6

C.

224.0.0.9

D.

224.0.0.10

E.

RIPv2 does not have support for multicast

Buy Now
Questions 64

The Nokia 7750 SR supports which two of the OSPF area types below?

Options:

A.

Not So Stubby Areas

B.

Level 1 Areas

C.

Stub Areas

D.

Partially Stubby Areas

Buy Now
Questions 65

Click the exhibit.

The two PEs are providing 6VPE and IPv4 VPRNs. The core network is IPv4/MPLS. Which of the following is the BGP family configuration for the MP-BPG on the PEs?

Options:

A.

family ipv4 ipv6

B.

family vpn-ipv4ipv6

C.

family vpn-ipv4 vpn-ipv6

D.

family ipv6 vpn-ipv6

Buy Now
Questions 66

What is the default priority value used for electing the DR on an Nokia 7750 SR running OSPF on an Ethernet?

Options:

A.

Priority of 0

B.

Priority of 1

C.

Priority of 64

D.

Priority of 255

Buy Now
Questions 67

By default, how does a VPLS handle a tagged frame received at the ingress of a null SAP on an Nokia 7750 SR?

Options:

A.

The FCS is verified and kept in the customer frame. The VLAN tag is kept and transported over the network.

B.

The FCS is verified and kept in the customer frame. The VLAN tag is removed for transport over the network.

C.

The FCS is verified and removed from the frame. The VLAN tag is kept and transported over the network.

D.

The FCS is verified and removed from the frame. The VLAN tag is removed for transport over the network.

Buy Now
Questions 68

Click on the exhibit.

An LDP tunnel is established on router R1 towards router R6. The link between routers R2 and R4 goes down. What will happen to the MPLS data traffic to router R6 IMMEDIATELY after the link goes down?

Options:

A.

MPLS data traffic will be discarded until the IGP finds a new next-hop to router R3.

B.

MPLS data traffic will be discarded unless the LDP tunnel has a standby secondary path.

C.

MPLS data traffic will not be discarded because router R1 received labels from both next-hops, routers R2 and R3.

D.

MPLS data traffic will not be discarded because of fast reroute capability on router R2.

Buy Now
Questions 69

Which of the following regarding "well-known discretionary'' BGP attributes is TRUE?

Options:

A.

They must be recognized by all peers and included in all BGP updates.

B.

They are discarded if not recognized by the recipient.

C.

They must be recognized by all peers and optionally included in BGP updates.

D.

The receiving router sends a notification if a well-known discretionary attribute is not present in an update.

Buy Now
Questions 70

What type of OSPF router generates a type 2 LSA?

Options:

A.

Area Border Router

B.

Autonomous System Boundary Router

C.

Designated Router

D.

All routers within an OSPF area.

Buy Now
Questions 71

Which of the following regarding BGP confederations is FALSE?

Options:

A.

The entire confederation is viewed as a single AS by an eBGP peer.

B.

Within a confederation, each member AS is considered as a stand-alone AS.

C.

Member ASs within a confederation can use route reflection.

D.

Member ASs must be fully meshed within a confederation.

Buy Now
Questions 72

Which of the following concerning OSPFv3 is TRUE?

Options:

A.

OSPFv3 uses MD5 Authentication.

B.

Router LSAs carry IPv6 prefix information.

C.

NSSA is supported in OSPFv3.

D.

OSPFv3 uses a 64-bit router ID.

Buy Now
Questions 73

How is the aggregator attribute handled with 32-bit AS numbers?

Options:

A.

With the same method and attribute as 16-bit AS numbers.

B.

With the same method as 16-bit AS numbers, but using the AS4_Aggregator attribute.

C.

Aggregation is not yet supported with 32-bit AS numbers.

D.

By using a dummy value of 23456 in the 16-bit AS aggregator field. This value lets the router know it needs to read the 32-bit AS number that is contained in the nextTLV.

Buy Now
Questions 74

Click the exhibit.

Given the following configuration for router R1, what is the expected Next Hop for prefix 192.168.1.0/27 as seen on router R2?

Options:

A.

10.0.2.1

B.

10.0.2.2

C.

10.16.10.1

D.

10.16.10.3

Buy Now
Questions 75

Which of the following about SDPs is FALSE?

Options:

A.

An SDP is not required for a local service.

B.

A single SDP can carry different types of services.

C.

An SDP can simultaneously support GRE and MPLS encapsulation.

D.

An SDP can use the system IP address to indicate the far-end router.

Buy Now
Questions 76

What type of LSA is used to flood information about prefixes from one OSPF area to other attached areas?

Options:

A.

Type 1

B.

Type 3

C.

Type 4

D.

Type 7

Buy Now
Questions 77

Which of the following statements concerning OSPFv3 is false?

Options:

A.

MD5 Authentication is not supported.

B.

Router LSAs do not carry IPv6 prefix information

C.

NSSA is not supported in OSPFv3.

D.

OSPFv3 uses a 32-bit router ID.

Buy Now
Questions 78

Click the exhibit.

Given that ISP 1 and ISP 2 are Tier 2 providers, and that ISP 3 and ISP 4 are Tier 1 providers, what is the most likely relationship between ISP 1 and the other ISPs?

Options:

A.

ISP 1 has a peering relationship with ISP 2 and ISP 4.

B.

ISP 1 has a peering relationship with ISP 2 and a transit relationship with ISP 3.

C.

ISP 1 has a peering relationship with ISP 2 and ISP 3.

D.

ISP 1 has a transit relationship with ISP 2 and ISP 4.

E.

ISP 1 has a transit relationship with ISP 2 and a peering relationship with ISP 3.

Buy Now
Questions 79

A CE is connected to an IES interface. Which of the following is TRUE?

Options:

A.

The IES's interface must be an IGP peer with the CE.

B.

The IES must use an IP address that is different than the CĀ£.

C.

The IES can only include one SAP for the CE.

D.

The IES must include a network port.

Buy Now
Questions 80

Which of the following about the Link LDP discovery process on the Nokia 7750 SR is FALSE?

Options:

A.

LDP Hello messages are sent over TCP.

B.

LDP Hello messages are sent to the All Routers address 224.0.0.2.

C.

LDP Hello messages are exchanged between all directly connected LDP enabled routers.

D.

Each LDP enabled router must have its own unique system IP address.

Buy Now
Questions 81

Which of the following about Fast Reroute link protection tunnels is FALSE?

Options:

A.

Link protection tunnels are established if a router is unable to establish node protection tunnels.

B.

Link protection tunnels are only requested for a primary LSP path.

C.

Link protection tunnels can be created for both one-to-one or facility Fast Reroute.

D.

Link protection tunnels detour around a failed next downstream router.

Buy Now
Questions 82

Which of the following routes is NOT considered an internal route?

Options:

A.

A route received from a BGP peer within the same AS.

B.

A route originated by a router in a different cluster of the same AS.

C.

A route received from a BGP peer from a different member AS of a confederation.

D.

A route received from a BGP peer from the same member AS of a confederation.

Buy Now
Questions 83

What modes of authentication are supported for RIPv2 on the Nokia 7750 SR?

Options:

A.

RIPv2 supports basic and MD5 authentication only.

B.

RIPv2 supports password and MD5 authentication only.

C.

RIPv2 does not support authentication, password and MD5 authentication.

D.

RIPv2 does not support authentication.

Buy Now
Questions 84

What are some of the characteristics of Nokia's implementation of non-stop routing? (Choose two)

Options:

A.

No protocol extensions required

B.

Only supported by OSPF and IS-IS

C.

Transparent to routing neighbors

D.

Uses Graceful Restart to inter-operate with other vendors

Buy Now
Questions 85

A VPLS receives a frame with the single VLAN tag 35 on the Q-in-Q SAP 1/1/1:35.*. Which of the following describes default Nokia 7750 SR behavior?

Options:

A.

The frame is dropped.

B.

The VLAN tag is removed, and the frame is transported over the network.

C.

The VLAN tag is kept, and the frame is transported over the network.

D.

The VLAN tag is kept, a VLAN of 0 is added, and the frame is transported over the network.

Buy Now
Questions 86

Which utility on the Nokia 7750 SR can be used to investigate an MPLS path?

Options:

A.

Isp-trace

B.

Idp-trace

C.

Sdp-ping

D.

Svc-ping

E.

Ping

Buy Now
Questions 87

The configuration of an Nokia 7750 SR is given below. Router Rl has established BGP sessions with routers R2 and R3. Which of the following is TRUE?

Options:

A.

Router R1forms an iBGP session with router R2, and an eBGP session with router R3.

B.

Router R1forms iBGP sessions with routers R2 and R3.

C.

Router R1forms eBGP sessions with routers R2 and R3.

D.

The types of BGP sessions with routers R2 and R3 cannot be determined.

Buy Now
Questions 88

An Nokia 7750 SR is configured with an export policy to redistribute its directly-connected networks into BGP. Which of the following databases contains the routes for these networks?

Options:

A.

The routes are in the RIB-In.

B.

The routes are in the Loc-RIB.

C.

The routes are in the RIB-Out.

D.

The routes are not in any of the BGP databases.

Buy Now
Questions 89

Which of the following about LDP sessions is TRUE?

Options:

A.

Frame mode requires multiple sessions between peers.

B.

The lower transport address initiates the session.

C.

Established LDP sessions run over a TCP connection.

D.

An LDP session is established immediately after Init messages are exchanged between peers.

Buy Now
Exam Code: 4A0-C04
Exam Name: Nokia NRS II Composite Exam: OSPF version
Last Update: Nov 23, 2024
Questions: 298
$57.75  $164.99
$43.75  $124.99
$36.75  $104.99
buy now 4A0-C04