4A0-205 Sample Questions Answers

In optical fiber propagation context, the first, second, and third window refer to different wavelength intervals where the WDM (Wavelength Division Multiplexing) optical transmission occurs.

The first window is the lowest loss window and is typically in the range of 1300-1324nm. This is the most commonly used window for long-haul communications.

The second window is the 1550 nm window and is the most widely used window for long-haul and ultra-long-haul communications. This window has a lower attenuation than the first window, but it also has more dispersion, which can limit the maximum transmission distance.

The third window is the range of 1625-1675 nm, it is also called the L-band window. This window has lower attenuation than the first and second window but its usage is limited due to the high cost of equipment and lack of commercial devices.

These windows are used in WDM systems to increase the capacity of the fiber by transmitting multiple channels of data at different wavelengths on the same fiber.

A,C,D are not correct as they are not related to the meaning of first, second, and third window in the optical fiber propagation context.

Node creation, systems validation and system provisioning. The CPB (Commissioning Parameter Builder) application is used to generate commissioning files for a Nokia 1830 Photonic Service Switch (PSS-1) and can be used to create new nodes, validate the system configuration, and provision the system with the appropriate settings and parameters. Power adjustment and generation of system loss report are not related to CPB.

 It is possible to open and manage EPT designs that are created with different releases than the release installed on the local workstation, however only designs created with current and older releases can be opened and edited. Designs created with an older release can be opened by a current release but changes cannot be made.

The EPT systems are displayed on the CPB (Commissioning Parameter Builder) panel and they can be individually selected. This allows the user to configure the network elements in the network and provision them according to their specific requirements. The systems are not reported on CPB, but through the Equipment Manager. The Equipment Manager is the interface used to configure the network elements and the EPT systems. The NFM-T is not related to the CPB and does not affect the CPB process.

A star topology is a network design where all devices are connected to a central hub, which acts as a central point of control and management for the network. This type of topology is commonly used in access networks, where a central node is used to aggregate traffic from multiple users or devices, and then forward it to the core network. This design allows for efficient use of resources and easy management of the network.

References:

• "Computer Networking: A Top-Down Approach" by James Kurose and Keith Ross (Chapter 3)
• "Data Communications and Networking" by Behrouz A. Forouzan (Chapter 2)

An open eye pattern indicates that the signal is not affected by noise, and the received signal is of high quality. This is because an open eye pattern is the result of a signal that is aligned in time, and is not affected by noise or other distortions.

References:

• "Optical Fiber Communications" by Gerd Keiser
• "Fiber-Optic Communications Technology" by Djafar K. Mynbaev
• "Optical Communications" by Gerd Keiser

The EPT run design command can remove previously designed elements, but the user is prompted to choose whether to delete them or leave them intact. This allows the user to progress their design while still keeping the existing elements in place. If the user selects to leave the existing elements, then they will remain in the same slots. If GMPLS nodes are used, the existing slots cannot change as they are controlled by another manager (GMRE).

The Metro Area Network (MAN) is a telecommunications network that spans a metropolitan area and connects multiple local area networks (LANs) or business networks together. It typically covers an area that is larger than a LAN but smaller than a wide area network (WAN). The purpose of a MAN is to provide a high-bandwidth, low-latency communication infrastructure for businesses and other organizations in a metropolitan area.

NFM-T is a network management system designed to manage optical networks in a unified manner. It is used to design, manage, and provision optical services having IP nodes as extremities. It supports a variety of technologies, including optical and IP, and fully supports LO, LI, L2, and GMPLS applications. It is mainly focused on the Nokia 1830 PSS product family, as well as other older product families.